CNC-TURNING

CNC-Turning

CNC-Turning is a machining operation where material is removed and chips or curls are created. Our range of lathes extends from small handy products to turning parts with a diameter of up to 1600 mm with a maximum length of up to 4 meters.

read more
CNC turning is one of the expertises of Drabo and offers this in a wide range of lathes, both teach-in and fully CNC controlled. Thanks to this combination, we are capable to machine single pieces, small series and medium-sized series extremely efficiently with the highest quality in the delivery time you requested.
In addition to CNC turning, Drabo also has a few conventional lathes. We can also conventionally turn many products in our market segments, with some products being preferred to be conventionally rotated due to the degree of freedom that these machines entail.

Machines
__________________________

Colchester VS 2500

Particularities: Digital numeric
Swing over bed: 400 mm
Swing over cover: 240 mm
Distance between centres: 1250 mm
Bar capacity: 55 mm

PBR 300

Particularities: Digital numeric
Swing over bed: 630 mm
Swing over cover: 380 mm
Distance between centres: 2000 mm
Bar capacity: 105 mm

PBR 450

Particularities: Digital numeric
Swing over bed: 900 mm
Swing over cover: 625 mm
Distance between centres: 4000 mm
Bar capacity: 130 mm
Maximum diameter: 1220 mm
Maximum seat diameter: 700 mm

 

PBR T600L

Particularities: Digital numeric
Swing over bed: 1240 mm
Swing over cover: 890 mm
Distance between centres: 4000 mm
Bar capacity: 150 mm
Maximum diameter: 1500 mm
Maximum seat diameter: 930 mm

Geminis GHT4

Particularities: Control by Fagor 8055 TC
Swing over bed: 620 mm
Swing over cover: 370 mm
Distance between centres: 2000 mm
Bar capacity: 104 mm
Maximum seat diameter: 480 mm

PBR 800

Particularities: Control by Fagor 8055 TC
Siwng over bed: 1640 mm
Swing over cover: 1255 mm
Distance between centres: 4000 mm
Bar capacity: 150 mm
Maximum seat diameter: 1255 mm

Montforts RNC 600

Particularities: Control by Siemens 3T4, hydrostatic conducting
Distance between centres: 600 mm
Power chuck diameter: 320 mm
Swing over cover: 220 mm
Bar capacity: 64 mm

Montforts FNC 1500

Particularities: Control by Siemens 3T4, hydrostatic conducting
Distance between centres: 1500 mm
Maximum seat diameter: 210 mm
Power chuck diameter: 646 mm
Swing over cover: 450 mm

Montforts RNC 7

Particularities: Control by Fanuc 16T, hydrostatic conducting
Distance between centres: 1500 mm
Maximum seat diameter: 465 mm
Power chuck diameter: 720 mm
Swing over cover: 550 mm

Montforts RNC 700

Particularities: Control by Sinumerik 840D ShopTurn, C-axis drive unit with servo engine and hydraulic brake
Distance between centres: 1500 mm
Bar capacity: 126 mm
Maximum seat diameter: 465 mm
Power chuck diameter: 820 mm
Swing over cover: 650 mm

PBR A600 CNC

Particularities: Control by Sinumerik 840D ShopTurn, C-axis drive unit with servo engine and hydraulic brake, extra weighted turret flange with 6 driven positions,
Distance between centres: 2850 mm
Bar capacity: 205 mm
Maximum seat diameter: 820 mm
Power chuck diameter: 1200 mm
Swing over cover: 1020 mm

Address details

___________________________________

Drabo Hardenberg B.V
Energieweg 13
0523 26 39 39
7772 TV Hardenberg

E-mail

Machinefabriek Drabo

____________________________

Contact

About Us

Vacancies

News

Contact Us